Active aluminum antenna REMO BAS-1133USB "Perseus" is used for reception of digital television signal. Equipped with an anti-GSM and anti-LTE filters. The antenna is featured a built-in power amplifier - through the bundled USB injector. This allows you to get rid of the clutter and the power supply. The amplifier is powered from the USB TV output or any other charger with the appropriate connectors.
The cable is not included.
- Placing antennas: Outdoor
- Antenna Type: UHF-band TV Antenna
- The gain, max., Channel 21-69: 34 dBi
- Supply voltage: 5 V
- Connector type: F
- Dimensions of assembly: 42.13 ? 3.15 ? 2.17 in
- Weight: no more 2.65 lb
Disclaimer
Channel reception will vary based on a broadcaster in your area, your distance from broadcast towers, and landscape obstructions between the reception antenna and the towers. Channel reception depends primarily on geographical location and terrain.
What to do if there is no signal coming from your antenna, or the antenna isn't working as expected:
1) Check the connections to make sure you have correctly connected the antenna to your HDTV or a third-party HD receiver.
2) Re-scan the TV set for channels. In the TV's setup menu, set the mode to Antenna or Air. Refer to the TV manual for detailed instructions.
3) Try to reposition the antenna. Sometimes moving that just for few feet can make a difference.
