AUTOPDR Dent Repair Tools 2 in 1 T Puller Big Dent Paintless Dent Repair Kits 69pcs Dent Repair Tool Dent Repair kit with Bridge Dent Puller Small Middle Dent for Car Body Hail Dent Removal Dent

Instructions for use: 1. Clean the dent area with a clean, dish towel we offered. 2. Place the glue stick on the hot glue gun, connect the power supply and preheat it for 5 to 10 minutes. 3. According to the size of the dent, select the tab of the glue applicator, and then place the heated glue on the pull tab. Immediately place the extractor tab in the center of the dent and hold it until it fits snugly. 4. Let the glue cool for about 4-6 minutes. The cooling time should be less than 8 minutes. 5. For larger dent, use a T-shaped repair tool and use a hot melt adhesive to pull the seam. Pull the slider back to lift the heavy-duty hammer. For small and medium dent, use the bridge puller. 6. If there is still a dent tap it with a flat hammer. 7. After the removal is complete, use a plastic shovel to remove the glue with alcohol. 8. Repeat the steps in the above procedure until the dent is repaired.