Auto Glass Urethane Windshield Adhesive Sealant Pack of 4 Black

1.This Fast-Curing Formula Automotive Window Adhesive has exceptional bonding power. 2. One application of the glass adhesive glue is all it takes for permanent weather-resistant protection. 3. From windshield and glass sealer to RV window sealant, this auto body seal compound can be used on any bare, primed, or painted surface. It can keep the window secure and moisture out. 4. Superior Seal can fill all interior or exterior seams and joints. 5. It holds the window and trim firmly in place and would has no leaks. TO OPEN: Cut nozzle at 45° angle to desired bead size, puncture inner foil seal to ensure easier extrusion. CLEAN-UP: All surfaces should be clean and scuff using an abrasive pad. TO USE: All surfaces should be clean Best if applied above 40°F(5°C). 1) Insert into caulking gun and trim the nozzle. 2) Apply sealant, pushing bead ahead of nozzle. 3) Apply the seam binding compound and tool it to achieve the desired finish. Wait 24 hrs and scuff prior to painting for best results. SERVICE TEMP: -4°F to 212°F (-20°C to 100°C) CURE TIME: 24 hrs. Cure time will increase with lower temperature, humidity. STORAGE: Store in cool, dry location with nozzle attached. To re-use product, remove nozzle and clean out cured sealant from the lip. If the weather is cold, better place the windshield adhesive in a plastic bag and submerge it in hot water before use for best results. Or warm the tube with a hair dryer. It can cure great even at -4°F.