AUTDER OBD2 Code Readers & Scan Tools Enhanced Car Engine Fault Code OBD Reader Diagnostic Scanner Tool for All OBDII/EOBD Protocol Cars

AUTDER is a consumer-centric company having been specialized in automotive aftermarket. Development and innovation have been played increasingly important pole in of automotive diagnostic tools. Where can I plug the OBD? The OBD port is often under the dash, or under a panel below the handbrake in the centre console. How to use it? Simply plug into the OBD II port on your car and turn ignition on and you ready to go. Why I can't erase the fault code? The fault causing the fault code to show will need to be repaired first then code can be erased. Warm tips: Works on 12V provided by the vehicle battery ONLY Must be 16 PIN OBD II potocol FUNCTIONS: Reads and displays DTCs Erases DTCs Reads and displays I/M monitor status View freeze frame data Reads and displays VIN Resets and turns off the MIL Easy to use with one plug-in Reads universal DTCs definitions in built-in data SPECIFICATION: Operating Temperature: 0 to 50 oC (32 to 122 oF) Storage Temperature: -20 to 70 oC (-4 to 158 oF) Power: 10.0 to 15.5 volts provided via vehicle battery Dimension: 109.2 mm (4.30") x 66.9 mm (2.63") x 17.6mm (0.69") Net Weight: 0.12Kg (4.23ounces) Gross Weight: 0.15Kg (5.29ounces) NOTICE? If the vehicle is OBD II compliant, the label will designate "OBD II Certified". Additionally, Government regulations mandate that all OBD II compliant vehicles must have a "common" sixteen-pin Data Link Connector (DLC). PACKAGE LIST: 1* OBD2 Handheld Scanner 1*User's Manual