Auart Zyilei-Performace 304 Stainless Steel Electrode A102 E308-16 Electrodes Solder for Soldering 304 SS Weld Wires Welding Rod Wide Application -Diameter - 1.6mm Material - 20pcs-

-The welding electrodes of 1.0mm and 1.2mm have strict requirements on the current of the welding machine and need to be debugged slowly. Welding of thin plates is not recommended for novices and those who are new to welding, especially under a millimeter. The welding electrodes of 1.0mm and 1.2mm are too thin when welding. It will swing back and forth. Customers with rich welding experience can choose a welding electrode of 1.4mm if they want to weld a thin plate of about 0.5 mm. Please take a look at the current range of the electrode current before shooting to avoid unnecessary trouble for both parties. -The electrode before welding shall be baked at 300-350 ? for 1 h. - Use DC power as much as possible, and the current should not be too large. Specification? Standard: GB / T983 E308-16 AWS A5.4 E308-16 Diameter 1.0mm length 250mm current 9-22A Diameter 1.2mm length 250mm current 13-32A Diameter 1.4mm length 250mm current 16-40A Diameter 1.6mm length 250mm current 18-50A Diameter 1.8mm length 250mm current 20-55A Diameter: 2.0mm Length 300mm Current: 30-55A Diameter: 2.5mm Length 300mm Current: 50-100A Diameter: 3.2mm Length 350mm Current: 70-130A Diameter: 4.0mm Length 350mm Current: 100-160A Package list: 10pcs/20pcs/1KG * welding rods Features: ** Good performance: Features low spatter tendency. ** Material: Made of good quality stainless steel, which is resistant to rust and corrosion. ** Wide application: Used for welding corrosion-resistant 0Cr19Ni9 and 0Cr19Ni11Ti, 201,202,301,302,304 corrosion-resistant stainless steel structure working temperature below 300? . ** Use: Suitable for AC and DC Notes: 1. Please allowed 1-3mm differences due to manual measurement, thank you for your understanding! 2. Due to the difference between different monitors, please understand that the picture may not reflect