ATUMTEK Bluetooth Selfie Stick Tripod Mini Extendable 3 in 1 Aluminum Selfie Stick with Wireless Remote and Tripod Stand 270 Rotation for iPhone 1111 ProXS MaxXSXRX87 Samsung and Smartphone

ATUMTEK Selfie Stick Tripod with Wireless Bluetooth Remote ATUMTEK Selfie Stick adopts integration design, the body is made by Aeronautical grade aluminum and processed by anodic technique. Let's say goodbye to fragile and smelly plastic with ATUMTEK, the the strongest, most portable, and most fashionable selfie sticks on the market. How to use Step1: Hold the product middle position and use the other hand to pull out the top cap about 2cm. Note: Push out on all three of the tripod legs attached to the stem at the button to activate the tripod if you want to use the tripod. Then, the tripod will open automatically when pulling out the aluminum alloy telescopic arm. Manual operation is prohibited. Step2: Hold the middle of the smartphone holder and pull out the aluminum alloy telescopic arm to your suitable length Step3: Widthwise set your phone inside the smartphone holder by releasing the top cap. Note: please avoid stuck the button of your phone. How to close Remove your mobile phone by releasing the top cap. Then, hold the product middle position and use the other hand to push the aluminum alloy telescopic arm back from the top cap. Note: If you open the tripod, the tripod will close automatically when push back the aluminum alloy telescopic arm. Manual operation is prohibited. Specification: ATUMTEK Selfie Stick Size: 27×27×166mm Material: Aluminum Alloy Weight: 172g Battery Type: Lithium Ion battery Batery Capacity: 50mAh Stretchable length: 610mm Note The maximum bearing force between mobile phone holder and puling rod is 5kg. Warm Prompt: You should not burn or over-charge the built-in lithium battery with any chargers in case of accident.