ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit - Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle- 4 Master Cylinder Adapters- 2 Air Quick Plugs

Features: 1. Car brake fluid changer tool kit includes new oil refill device and waste oil extractor, 2 in 1 set 2. One person operation design, easy to handle 3. Widely suit for car truck motorcycle pickup and most vehicles 4. Refill bottle can be held on the mouth of vehicle's brake fluid reservoir by the long screw How To Use: 1. Fill the new oil filler bottle with new oil and close the valve on the screw. Choose a right cylinder adapter to screw on the long screw of new oil filler bottle, and stuck it on the brake fluid reservoir, then open the valve. 2. Connect the vacuum pump (not included) to the waste oil bottle, and connect the black cone nipple to the vehicle bleed valve. Hook the waste oil bottle to the engine cover and use the trigger locker to hookup the trigger. 3. Open the vacuum pump to 90-120PSI for 4-5 mins, until the fresh transparent oil is sucked out from the brake bleed valve (you can observe from the transparent hose), then close the vacuum pump and brake bleed valve 4.Repeat this process on each wheel, then check the pressure of the pedal. Note: If the brake bleeder screw is not sealed well, the air will go into the transparent hose, and you will see bubbles. There are three sizes of brake bleeder screw adapters, please choose the most appropriate size adapter. Grease the brake bleeder screw if it cannot be completely sealed when use. Package Included: 1x 1L Old Oil Collection Bottle with 1.8M Hose and Black Suction Nipple (Hose: I.D. 5MM, O.D. 9MM) 1x 0.8L New Oil Refill Bottle 1x New Oil Refill Bottle Lid with Long Screw 1x New Oil Refill Bottle Lid O-ring 4x Master Cylinder Adapters 2x Air Quick Plugs (American and European Style) 1x Spare Black Suction Nipple 1x Barbed Connector for Spare Black Suction Nipple