APT Woven Fiberglass Cloth Tapes (6" x 36Yds), Repairs and Reinforcements, Glass Fiber Mesh Joint Tape Plain Weave Reinforcement E-Glass, No Adhesive (152mm x 36Yds)

APT Woven Fiberglass Tape with the feature of heat-resistance and insulation is ideal for selective reinforcement of fiberglass laminates, sleeve or pipe winding, seams, and molding. Why it is called tape, even it does not have adhesive backed? The reason why the Woven Fiberglass tape called tape is for their appearance width. Actually, it does not have adhesive backed. Their finished edges offer easier handling and a clean, finished appearance, and keep the tape from unraveling. Their plain weave construction builds in uniform strength in both horizontal and vertical directions. Tapes are meant to be used with a resin, they saturate easily, and are compatible with epoxy, polyester, and vinyl ester. With the Fiber Glass First Quality commitment, you can expect the same finish, sizing, and handling characteristics every time you order this tape. The Total full roll is 50mm X 36 YDS (33M) Product Application APT Woven Fiberglass Tape is Widely used as bindings of coil for electrical machinery and appliance. Ideal for wrapping electrical cable. Nominal Values The following data are nominal values based on PSTC, ASTM and other standard tests. The data should not be considered as specifications. Backing Thickness 5 mil Total Thickness 5 mil Density Warp 27 (strand/cm) Density Weft 11(strand/cm) Tensile Strength 340 lbs./in Temperature 600°C