AOMAG Pneumatic 38 PT 5 Way 2 Postion Air Hand Lever Operated Valve Pneumatic Solenoid Valve Manual Control Push-Pull 4R310-10

Designed with hand lever for push/pull operation, widely used in pneumatic system. Used for controlling pilots or diaphragms of larger valves or small cylinders or any pressure system that is alternatively pressurized and exhausted. Package Included: 1 x Hand Pull Valve Notes: Make sure the Air Flow Direction is Correct During Installation (as Shown in Page A+). Incorrect Air Flow Direction Will Cause the Solenoid Valve to Be Unable to Be Used Normally. Make sure the Service Environment Meets the Requirements of the Product (such As Air Pressure Range, Temperature Range, Voltage, Etc.). Make sure the Response of the Solenoid Valve at Low Temperature. Do Not Use the Product in the Environment of Shaking or Vibration. Make sure Teflon Tape Should Not Block the Air Mouth Under the Fittings. Check the Threaded Mouth for Impurities before Installation. Wrap the Teflon Tape Around the Fittings for 3-5 Rings after Cleaning. Description: 1.Double-head solenoid valve with memory function, low power consumption 2.It is made of aluminum body and has fine surface treatment. It has high durability and is not easy to leak. 3.The handle shaft and the valve body have small resistance and accurate positioning 4.High-precision valve stem, seal design to ensure closure 5.The special process of the valve body hole, low resistance,A filter screen is installed inside the air inlet to remove impurities into the solenoid valve and prolong service life. 6.The three-port two-position manual reset type manual valve adopts spring steel ball positioning, which is sensitive and easy to switch. Please pay attention to excessive force and control position error caused by mistake. 7.Used for controlling pilots or diaphragms of larger valves or small cylinders or any pressure system that is alternatively pressurized and exhausted.