Aodesy Push Pull Type Electric DC Solenoid Electromagnet 12V Spring Plunger Solenoid 45N Force 15mm Stroke

1Pcs DC Solenoid Electromagnet in a Pack Model: FJ-Z05 Material: Metal, Electronic Parts Color: Silver, Blue Voltage: 12VDC Current: 2.5A Force & Stroke: 45N, 15mm Plunger diameter: 20mm/0.8inch Total Size(approve): 80x32x30mm/3.15x1.26x1.2inch (L*W*H) Type: Pull Push type Packing weight: 186g Packing Size: 12x8x2.5cm This is a mini low force DC pull-push type solenoid electromagnet which can produce linear force to pull or push the connected deivece with short lasting time when power on/off ideal for automatic control system. Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil.This makes the solenoid able to pull (from one end) or push (from the other) Please note that as an automation device actuator. Because the current,single-cycle not long power for point formula work. Single power work time within 2 seconds of the best! Long energized coil will cause a short circuit is similar to artificial electromagnet overheat temperature is too high will affect the life of the electromagnet.