Antenna Pole Outdoor Antenna Mount - Home Outside Antenna Mast Pole Universal Wall Mount Bracket for Signal Booster - 10 Length Mounting Pole

This Antenna Mount Pole is 10" length, 1. 5" in diameter, is meant for outdoor use and can be applied to building roof or wall. Installation Steps 1 - Attach Wall Mounting Bracket to a flat surface or wall with screws in the 5 provided holes of the bracket. 2 - Place Pipe Bracket onto the U-Bolt with the U-shapes from both parts facing each other to create a circle. 3 - With the Pipe Bracket and U-Bolt assembly in hand place the Pole Mounting Bracket next to the Pipe Bracket. 4 - Put the split washers over the end of U-Bolt threads. 5 -Place the Nuts over the U-Bolt threads and tighten slightly to make sure none of the previously assembled components fall off the U-Bolt. 6 - Place the Pipe in between the Pipe Bracket and the U-Bolt and set at desired height and tighten nuts to secure the pipe in place. The antenna mount bracket is to be installed on a flat surface via screws, then the pole can be attached to the bracket with the pipe bracket. When mounted correctly the pole will be upright, in the optimal position for a outdoor antenna to be mounted to the pole. Package Contents Pole U-Bolt Pipe Bracket Wall Mounting Bracket 2-Split Washers 2-Nuts