Anmbest 6S 25.2V 15A 18650 Charger PCB BMS Protection Board, Li-ion Lithium Battery Charger Lipo Cell Module

Specifications: Size: approx.50*30*2mm Lampshift maximum discharge current: 15A Instantaneous discharge current: 25A Charging voltage: 25.5V Charging current: 15A (MAX) Battery: Nominal 3.7V lithium battery Overcharge detection voltage: 4.28 ± 0.05V Overcharge protection delay: 0.1S Overcharge release voltage: 4.08 ± 0.05V Over discharge detection voltage: 2.55 ± 0.08V Overdischarge detection delay: 0.1S The overdischarge release voltage: 2.9 ± 0.1V Overcurrent detection voltage: 150mV Overcurrent detection delay: 9mS Overcurrent protection current: 30 ± 3A Overcurrent protection release condition: Disconnect the load Short circuit detection delay: 250uS Short circuit protection Release condition: disconnect load self-recovery Main circuit conduction resistance: ?20m? Working current: ?30uA Sleep current (battery over discharge) ?10uA Temperature range: -30 / + 80 ? Attention: When you wiring, plese do it strictly according to the wiring diagram. Do not deliberately make it short circuit. Do not mix the good battery and poor battery to use. The internal resistance of 6 battery capacity are closer will be better. Package inlcuded: 1x 6S 15A lithium Battery Protection Board