Anigre Figured Fiddleback Wood Veneer 8" x 15" raw no Backing 1/42" thicknes AAA

Figured Fiddleback Anigre wood veneer 8" x 15" with no backing (raw veneer 1/42" thickness). ONE piece per price. All pieces similar. "AAA" quality grade. Second picture is a finished piece with clear semi gloss to show golden color that is likely to be the result of finishing. You get unfinished veneer as shown in first photo. Figuring (grain) may vary between the finished piece and the unfinished piece that you will get. Use second photo as guide. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. Visit My Store: JSO Wood Products Other sizes and backed veneer may be available. About pictures : Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness : (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = 1/16th"-1/25th" How to cut : generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply : Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish : most any conventional