AMONIDA Universal Garage Door Opener Electric Cloning Remote Control Wireless 4-Key Gate and Garage Door Remote

1. Hold the copied remote control in one hand and the copying remote control in the other hand. The two remote controls should be as close as possible. Press the buttons of the two remote controls at the same time. After 3 seconds, the LED indicator flashes for 3 times. Then it flashes continuously, which means that the button code for the copying remote control is the same as the button code of the copied remote controller. The other buttons are the same as above. 2. Press and hold the two buttons on the front (top) of the remote control. After the lamp flashes in 3 seconds, release one of the C or D keys, and continuously press the C or D button for three times. The LED light continues to flash, indicating that the code stored in the remote has been cleared. 3. Recovery method description: If the useful data is cleared by mistake, you can press the two buttons on the back (below) of the remote control at the same time without re-copying the other remote controllers. After the indicator flashes rapidly for 3 times, the recovery is successful. Specifications: Type: Enhanced special frequency copy remote controller Operating voltage: 6V(2 x 3V 2016 model button battery) Operating frequency: special frequency 315/433MHZ (other frequencies can be customized) Remote control distance: 50m (in open environment) Fixed code and learning code remote control: PT2240, PT2260, PT2262, EV1527, FP527, AX5326, PT2242, HT600, HT680, HT6207, HT6010, HT6012, HT6014, AX5326-4, SMC5026, SMC5326-3, SMC5326-4, SMC918, SMC918-3, SMC918-4, etc. Size: Approx. 6.2x3.5x1.1 cm/2.44x1.38x0.43inch