AMOGOT Metal Steel 48P Pinion Gear 13T 14T 15T 16T 17T 3.175mm Shaft Motor Gears Set with Hex Key for 1/10 RC Brushless Brush Motor RC Upgrade Part

Description: Hardened steel to increased wear resistance and improve fatigue life Nitrided to enhanced hardness corrosion resistance Tooth count: 13T 14T 15T 16T 17T  Tooth pitch: 48 pitch length: 9mm For shaft: 3.175mm Package include: 1 X 48p 13T pinion gear 1 X 48p 14T pinion gear 1 X 48p 15T pinion gear 1 X 48p 16T pinion gear 1 X 48p 17T pinion gear 5 X Screws 1 X Hex Key Make sure you thread lock the grub screw. They are hard to find when they fall out. Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC. How to install the pinion gear: You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft. When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small. It should be about the thickness of a piece of paper.