USB C NVMe PCIE /SATA?NGFF?SSD Enclosure (Double Protocol SSD)
Please note: It supports PCI-E based M key / (B&M) key M.2 NVME SSD; SATA-based B&M Key M.2 SSD. Not compatible with B Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
Features:
- Interface type: M.2 NVME and SATA to USB 3.1 Gen 2
- Support SSD Drivers Size: 2230, 2242, 2260, 2280mm
- Featuring advanced RTL9210B chip
- Theoretical speeds up to 10 Gbps
- Comes with two cables: USB C to USB C cable, USB C to USB A cable
- The aluminum alloy shell effectively cools the heat.
- Tool-Free and quick installation
- Plug & Play: No driver required.
- Attention: NVMe and SATA SSDs are not included.
- Attention: Due to the extremely fast transfer speeds, the temperature is higher than USB 3.0 HDD drives. We have tested ours to be approximately 50°C on writes and below 40°C on reads, and even after long periods of R/W, the speed does not drop or the device does not shut down.