ALMOCN 3PCS MAX7219 Dot Matrix Module 32x8 4 in 1 LED Display Modules Drive with 5Pin Wires for Arduino Raspberry Pi, Blue

?Features? 1.10MHz Serial Interface 2. Individual LED Segment Control 3. Decode/No-Decode Digit Selection 4. 150µA Low-Power Shutdown (Data Retained) 5. Digital and Analog Brightness Control 6. Display Blanked on Power-Up 7. Drive Common-Cathode LED Display 8. 24-Pin DIP and SO Packages ?Parameters? 1. A single module can drive a total of 8 * 8 dot matrix overcast 2. Working voltage: 5V 3. Size: *12.8 cm*3.2 cm *1.3 cm (L*W*H) 4. With 64 fixing screw holes, diameter 3mm 5. module with input and output interfaces, support for cascading multiple modules ?Wiring instructions? 1. The left side of the module is the input port, and the right side is the output port. 2. When controlling a single module, you only need to connect the input port to the CPU. 3. When multiple modules are cascaded, the input of the first module is connected to the CPU, the output is connected to the input of the second module, the output of the second module is connected to the input of the third module, and so on. Take 51 MCU as an example: VCC ? 5V;GND ? GND;DIN ? P2.2;CS ? P2.1;CLK ? P2.0 Package included: 3 x dot matrix module 3 x 5 Pin DuPont line