Specification:
Size: 0.96
Resolution: 128X64
Viewing angle: greater than 160 degrees
Supported platforms: for 51 series, MSP430 series, STIM32 / 2, SCR chips
Low power consumption: 0.04W during normal operation
Support wide voltage: 3.3V-5V DC
Working temperature: -30-80 degrees
Volume: 27MM * 27MM * 4.1MM
Driver IC: SSD1306
Communication: IIC, only two I / O ports
No font: The software takes word modulo
Backlight: OLED self light, no backlight
Interface:
VCC: 3.3-5V GND: Ground
SCL: Serial Clock
SDA: Serial Data
Features:
This OLED display module is small, only 0.96 diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.
It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you will like the miniature for its crispness.
The Driver chip of this OLED is SSD1306, which is compatible with IIC communication. So this module can be controlled by I2C.
That is, except the VCC and GND, 2 wires would be needed when using 4-wires I2C mode.
There is also a simple switch-cap charge pump that turns 5v into a low voltage drive for the OLEDs, making this module the easiest ways to get an OLED into your project.
Applications:
MP3, MP4, watch
Head-mounted displays
Meters and other intelligent instruments
Design any pretty patterns for your beloved electronic devices!
Package included:
2 * 0.96 Inch I2C OLED Display
ALMOCN 2PCS 0_96 OLED Module I2C IIC Serial 12864 128X64 OLED Display Module with SSD1306 Driver White OLED
Was:
$69.88
Now:
$34.94
- SKU:
- UFR37600
- UPC:
- 701715441125
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.