This 3-in-1 video audio IR remote extender kit allows you to transmit video audio and IR remote signals over low-cost Cat5/Cat5E/Cat-6 cable with maximum distance up to 330 feet or 100 meters.
A real cost-effective solution for extending analog video, audio and IR signal for long distance and a clean setup.
Now you can share your A/V system, watching the same video or listening to the same audio and controlling the AV device from 2 different TVs or rooms. [Note]: the Ethernet cable used in the setup can not be mixed with networking equipments together.
Users can purchase additional receiver unit and use a RJ45 splitter connector for expansion and extension to another remote location, resulting in sharing and controlling an A/V system from 3 different locations.
Long Range Video Audio Transmission
This analog video audio extender can send analog AV signal for over 330 feet or 100m UTP cable run while maintaining superior video audio integrity with the same clear and sharp sonic quality outputs all the way as the original input.
No signal loss, no noise and no signal degrading quality after the long cable run.
Long IR Remote Control Range With Solid Quality
Solid IR remote control signal will be maintained all the way with no loss.
Maximum distance for IR remote control signal can be as far as 800ft or 250 meters.
1 Transmitter For 2 Receivers
One transmitter can work with 2 receivers for additional expansion and extension.
Users can purchase additional receivers combined with use of a RJ45 splitter connector for another bedroom to realize the sharing and controlling an A/V system in three different locations.
Maximum Flexibility
CAT-5 and CAT-6 twisted pair cables are easier to hide away in offices, buildings and behind walls and lower cost than regular coax and RCA cables.
