Features:
SUPPORT Betaflight 3.3
7-24V input, 5V output for your camera
25mW/200mW/400mW/600mW power switchable
0.01mW parameter-adjusting Mode, power with zero interference
One button setup channel/band/power with LED display
Support OSD Configuring via Betaflight Flight Control Board
Integrated with UART, compatible with Betaflight OSD FC
Specifications:
Input voltage: 7V-24V
Power supply: 5V Camera @ under 0.3A max.
Output power: 25mW: 100mA
200mW: 200mA
400mW: 250mA
600mW: 320mA @12V
Range: Up to 2 km with omnidirectional RHCP antennas
Port connector: JST, 6pin
Antenna connector: MMCX
Dimensions: 26(W)x26(D)mm,20x20mm(hole)
Weight:4.6g(excluding antenna)
Package includes:
1x FX3
1x Cable
1x MMCX Antenna
1x Product manual
Note: 5645,5925,5945 channels are not available due to FCC regulation!
Please read the Info before purchasing.
Due to the equipment need being sold under the FCC's amateur radio rules.
This product requires an amateur radio license to operate legally in the US.
Operators must abide by all applicable laws and hold an amateur license to operate this equipment.
Use of amateur equipment without a license could subject the operator to significant fines by the FCC.
