AKARY Conference Microphone 3_5mm Plug Mic Table Mini Plug Play Meeting Omnidirectional Boundary Condenser Computer Microphones for Skype Chatting Streaming VoIP Calls

How to install: Step 1: Find the conference microphone port on your computer and plug in the microphone. Step 2: Control Panel-Sound. Step 3: Select the tab “Recording” and set the conference microphone as default device(Figure 1 in Manual), then double click the microphone. Step 4: Select the tab “Listen”and be sure the box “Listen to this device” is unchecked. (Figure 2 in Manual) Step 5: Select the tab “levels” and adjust the volume, make sure the conference microphone is not mute. Conference microphone boost can be adjusted when needed. (Figure 3 in Manual) Step 6: Select the tab “Enhancements” and be sure the box is checked as Figure 4 in Manual. Note Note 1 : Some sound card does not support this function, and no this tab, can not be set here. Note 2: if the mic and headphone port on your PC is a 3.5 combo port, you will need an extra adapter( 3.5 mm to conference microphone and headphone adapter) Conference Microphone parameter: Model No. iTalk-01 Conference Microphone Polar Pattern: Omin-directional Conference Microphone Sensitivity: -37 +/-3dB Conference Microphone sound Pick-up range: Max 10ft/3m Conference Microphone frequency responde :100 HZ-10KHZ Conference Microphone Connectivity: 3.5 mm Conference Microphone S/N ratio: 70dB 1Khz at 1 Pa Conference Microphone SPl: 60 dB Conference Microphone cable length: about 5 ft/1.5 m Conference Microphone dimension: 50 mm*50 mm* 15 mm Conference Microphone Weigh: about 50 g