AITRIP LCR-TC1 Colorful Display Pocketable Multifunctional TFT Backlight Transistor Tester for Diode Triode Capacitor Resistor Transistor LCR ESR NPN PNP MOSFET with 1.8 inch Colorful Display

Application :  1 :  It can be widely used to detect NPN and PNP transistor, capacitor, resistor, diode, triode, N-channel and P-channel MOSFET, IGBT, JFET, triac and battery etc. 2 : It can also be used to detect infrared wave forms. 3 :It also can detect zener diode and has the function of self-calibration. Features :  This transistor tester is built-in large-capacity rechargeable lithium battery-350mAh Included, lithium battery voltage detection, Automatic measurement of voltage stabilizing diode (0.01-30V). After detection, align the infrared remote control with the "IR" light, then press the button in the remote control, if the detector successfully decode it, it will display the data code and infrared wave form. Put the pins of component in corresponding area, then dial the little handle and the detector will test it automatically, finally the results will display on the back light TFT screen clearly. Specifications: Material: ABS Battery: 1 * lithium battery, 350mAh (included) Display: 35 * 30mm TFT screen Diode range: ?4.5V Zener diode: transistor detect area: 0.01-4.5V  zener diode detect area: 0.01-30V Triac range: IGT ? 6mA Capacitance: 25pF-100mF Resistor: 0.01-50M? Inductance: 0.01mH-20H Battery: 0.1-4.5V Note : 1 :  be sure to DISCHARGE capacitors before connecting them to the tester! The tester may be damaged before you have switched it on 2 :We do not recommend using the tester to measure the battery! The battery voltage must be less than 4.5V, otherwise the tester may be damaged Package I