Air Sprayer- High Pressure Air Paint Spray Gun- W?71?S Caliber 1.5Mm For Automotive Industrial

Feature:1. The air sprayer owns advanced equipment manufacturing, high degree of atomization, low energy consumption, high efficiency and easy maintenance. 2. The spray gun is made of black diamond material, which is sturdy and durable and the frosted style has an excellent grasping feeling. 3. The nozzle is made of wear?resistant, corrosion?resistant, high?strength stainless steel, and the nozzle can be take apart for cleaning and maintenance. 4. The most suitable spraying distance of the pneumatic spray gun is about 200mm. 5. The spray gun suitable for a variety of different applications, such as automotive, industrial, marine and wood work. Specification: Condition: 100% Brand New Item Type: Paint Spray GunMaterial: Stainless Steel + Black DiamondColor: As Pictures Shown Size: Approx. 600ML Paint Supply Method: Siphon TypeWorking Pressure: Approx. 0.25-0.4 (Mpa)Diameter of Spray Hole: Approx. 1.5mm / 0.06inAir Connector Size: Approx. 1/4in / 1.1cmPaint Spraying Volume: 435 (?ml/min)Effective Spray Distance: Approx. 20cm / 7.9inAir Consumption: 5-10 (l/min)Scope of Application: Latex Paint, Primer and Top Coat Spray Instructions 1. Pour the paint with a good proportion into the paint pot and connect it with the feed joint.2. Connect the compressed air to the air inlet connector.3. Pull the trigger and adjust the proper working air pressure (3.5-4.5bar).4. Adjust the amount of paint and spray width (adjust as needed).5. Parallel and vertical spray on the clean surface (spray distance is about 20cm / 7.9in). The difference between upper and lower pots:1. The lower pot S is suitable for spraying horizontally or less than 45 degrees up and down.2. The upper pot G ca