AgiiMan Car Wash Foam Gun - Foam Cannon, Garden Hose Sprayer with Adjustment Ratio Dial Blaster, Auto Detailing Cleaning Soap Cleaner, No Pressure Washer Required

Car Wash Foam Gun - Foam Cannon for Garden Hose Product connection steps: 1: Plug the siphon pipe into the connector  of compressed- air pipe under the mixing head  2: Align four small protuberant parts of foam nozzle  with four grooves of mixing head  and then insert the foaming stick into mixing head 3: Install the quick coupling of pistol grip onto the quick connector of mixing head  tightly 4: Tighten the quick connector and then attach it to the pistlol grip  5: Fill an amount of detergent into the bottle and then fix the bottle to the mixing head  Process of washing vehicle: 1: First flush the vehicle wholly with this water gun. 2: Connect the foamed gun head with the water gun.Spray out foam proportioned onto the vehicle body. 3: Wipe the vehicle body with sponge 4: Offload the foamed gun head and washing the vehicle body clearly with water gun. 5: Wipe the vehicle body with clean rag.The vehicle would look brand-new. Attentions? 1: Remove the brass connector from the bottom of the hand grip and your hose will then attach to a garden hose 2: Please discharge the Hose kit from the water faucet and Foam Gun when you don't use it.  3: When the tap water faucet is.open up, please don't demount the tube or hold the Foam Gun in improper way. 4: Never mix with other kinds of detergents. 5: Please don't use it on human being. 6: It is better to wear rubber gloves and protective glasses when you use it. Notice: In order to avoid failures, the NEW Foam gun must be cleaned after use. 1. Fill clean water into the cleaned bottle to clean the mixing head a few minutes. 2. To prevent the coagulation of detergent after drying, please clean themixing head after immersion in water.