aelrsoch 3.5" External Floppy Disk Reader Drive Portable Floppy Disk Reader 1.44MB FDD for PC Windows 98/ME/2000/XP/Vista/Windows 7/8/10 Plug and Play

There is no floppy disk Reader drive in the computer of the market , which causes the files in our previous floppy disk not to be read due without the drive , so our device is the perfect solution to read the file information on the floppy disk. And this floppy disk drive need to only be connected to your USB port, then you can directly read the file information on the disk. It reads/writes 3.5" floppy disk 1.44MB. Product information: External floppy disk drive with USB port. Read/write 1.44MB floppy disk. USB1.1/2.0/3.0 port compatibility. Plug and play with MAC , Windows10 Windows 8 /7 VISTA/XP/ME/2000/SE/98 Suitable for desktop, laptop , all- in-one computer and other devices. Specification: 3.5 -inch 720 KB / 1.44 MB The current available USB bus power supply: 500 ma or less. USB data transmission rate: full speed /12 Mbps. Date capacity: 720 KB /1.44MB (formatting). Data transmission rate: 250 Kbits (720KB)/500 Kbits (1.44mb). Rotate Speed: 300 RPM, 360 RPM (theoretical value of experimental test) Cable length: about 40cm. Size: 11.7 X1.9 X10.6 (CM) Weight: 350g Packaging contents: 1 x external USB floppy disk drive. 1X product manual (not including floppy disc, only for explanation) Note: 1.This is a USB 3.5 "floppy disk drive. It's not a usb CD-ROM or usb DVD. When I first plugged this floppy drive into my Windows 10 computer, it recognized the floppy and set it up with no problem. When I was finished using the floppy I just unplugged it. The next time I needed the floppy, I plugged it back up but my Windows 10 never would show it to where I could access it again. Just like it was not there. I did a little research and read a guy’s write up. He said the reason could be it is still in memory and cannot set it up again with Window's still holding it in memory. The writer said to try holding the shift key down while shutting down. He said it would clear the