Relay Module Parameters:
Channel: 2 Channel
Working Voltage: DC 12V
Normally Opened Compatible Load: AC 250V/10A, DC 30V/10A
Action Time (Under Rated Voltage): Less Than 10ms
Release Time (Under Rated Voltage): Less Than 5ms
Power Indicator (Green), Relay Status Indicator (Red)
Module Size : 50mm * 26mm * 18.5mm (L * W * H);2x 1x 0.7
Friendly Interface Design. All Interfaces Can Be Connected Directly Via Terminal Wiring Leads.
Input Interfaces:
DC +: Positive Power Supply DC 12V
DC-: Negative Power Connection
IN1: 1 Channel Signal to Trigger The End , You Can Set High or Low Level Control Relay
IN2: 2 Channel Signal to Trigger the End , You Can Set a High or Low Level Control Relay
Output Interfaces:
NO1: Relay Normally Open Interfaces , Relay Before Floating, Shorted Pull With COM1
COM1: Relay Common Interface
NC1: Normally Closed Port, COM1 Relay Shorted Before and After The Pull- Vacant
NO2:Normally Open Relay Interface, Relay Before Floating , Pull Back and COM2 Short
COM2: 2 Common Interface Relay
NC2: 2 - Way Normally Closed Relay Interface Relay Short Front and COM2 , Pull Vacant Post
High/Low Level Trigger:
1. Low Level Trigger When Jumper and L Short Circuit
2.2.High Level Trigger When Jumper and H Short Circuit
Package Contents:
4x 2 Channel Relay Module with Optocoupler Isolation