Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
Fitment:
For Ford
2006-2009 Ford Fusion
2006-2007 Ford Freestar
2007-2010 Ford Expedition
2005-2009 Ford Mustang
2007-2009 Ford Focus
2007-2010 Ford Edge
2006-2011 Ford Crown Victoria
2006-2008 Ford F150
2009-2010 Ford Flex
2007-2010 Ford Taurus
2005-2008 Ford Escape
2006-2010 Ford Explorer
2007-2011 Ford Ranger
2006-2007 Ford Five Hundred
For Lincoln
2006 Lincoln Zephyr
2007-2009 Lincoln Mkz
2007-2010 Lincoln Navigator
2007-2010 Lincoln Mkx
2006-2011 Lincoln Town Car
2009-2010 Lincoln Mks
2010 Lincoln Mkt
2007-2008 Lincoln Mark Lt
For Mazda
2006 Mazda Tribute
2008-2011 Mazda Tribute
2007-2010 Mazda B4000
2007-2008 Mazda B3000
2007-2010 Mazda B2300
For Mercury
2006-2011 Mercury Grand Marquis
2008-2009 Mercury Sable
2005-2008 Mercury Mariner
2006-2010 Mercury Mountaineer
2006-2009 Mercury Milan
2006-2007 Mercury Monterey
&nbs