Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
FITMENT:
Toyota Sequoia (from 2014 to 2015)
Toyota Sequoia 200L(from 2014-03 to 2017-12)
Toyota Sequoia 200L(2)(from 2020-01 to EOP)
Toyota Sienna (from 2015 to 2015)
Toyota Sienna 580L(from 2014-03 to EOP)
Toyota Tundra (from 2015 to 2015)
Toyota Tundra 480A/180L(from 2014-03 to EOP)
Toyota Tundra 954A(from 2019-01 to EOP)