ADS1115 16 Bit 4 Channel I2C IIC- MELIFE 2.0V to 5.5V Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino and Raspberry Pi

Description: For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller single/differential signals to the full range. The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. Simply connect GND to ground, VDD to your logic power supply, and SCL/SDA to your microcontroller's I2C port and run the example code to start reading data. Parameters: ADC Bit Rate: 16 Bit Interface Type: I2C Channels: 4 Channel AN0 AN1 AN2 AN3 Input Voltage: 2.0V-5.5V Channel Input Voltage : 0-VDD Continuous Mode: Only 150¦ÌA Single-Shot Mode: Auto Shut Down Programmable Data Rate: 8sps-860sps Input Range Programmed control, 7 types input ranges: -0.256V -- +0.256V, -0.512V -- +0.512V, -1.024V -- +1.024V, -2.048V -- +2.048V, -4.096V -- +4.096 V, -6.144V -- +6.144V I2C 7-bit addresses between 0x48-0x4B Code Resource: https://drive.google.com/open?id=1AuX7FhsNPuUMNDKT4wKErvJPC7KsyLW0. Package Included: 1 * ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter 1 * Pin Header