Adhesive Sponge Holder Brush Holder 2-in-1 Kitchen Sink Caddy SUS304 Stainless Steel Rust proof Water Proof No Drilling

Hate sponge sit in the wet sink and get smelly and germy Hate suction sponge holders that fall off often? This sink sponge holder is your BEST choice - Saves lots of space in your sink, keeps your sponge handy and clean! It is big enough to hold your scrubber sponge, rinse sponge, and a scouring tool. Yet it's also small enough to not interfere with usage of the sink. The caddy is easy to take on and off to clean. The adhesive part easy to remove without damage, without leaving marks. What You Get: 1 x Sponge Holder, 2 x Adhesive, 1 x User Manual(Sponge and Brush not included in package) please note: If the rack keeps falling off the bracket, the problem is you do not realize that you have to force the holder into the bracket that you stick onto the sink. It can look like all you do is lay the holder on top of the hooks on the bracket, as it takes A LOT OF FORCE to push them into the hooks, but once you get it in, it is not coming off for any reason. Where to use: ONLY stick on smooth hard surfaces. DON'T stick on painted walls or wallpapers as it will take off your paint or wallpapers. How to use 1. Clean the area where the adhesive installed and dry. 2. Peel off the protective cover on the back, install the adhesive and press firmly to squeeze air out. 3. Wait 30 mins for the adhesive to set 4. Hang the shelf on the hook. It can be used 3 years after installation. you have to push it in pretty hard for it to snap into place! How to remove: You can use a hair dryer to heat the adhesive surface, then tear off the installed adhesive. Do not worry about the adhesive leaving any residue on the sink surface. Just pull the rack out of the hook for cleaning.