Adam's Polishes Graphene Tire Dressing Combo

If you’re looking for a deep black, like new tire appearance then you’ve come to the right place. Adam’s Graphene Tire Dressing is a must-have for those that aren’t interested in a shiny, wet looking tire and want to maintain a satin appearance for as long as possible with zero opportunities for sling.Adam’s Graphene Tire Dressing has been formulated to contain the same reduced graphene-oxide ceramic resins that are built into our other graphene products, such as Adam’s Graphene Detail Spray, allowing for a curing characteristic to be added to a traditional water-based, silicone tire dressing.Regular usage of this tire dressing helps seal the tires and lock out water, dirt, and other contaminants to prolong the appearance of a like new tire and allow it to be more easily cleaned between applications.Instructions For General Use:1. Clean and prepare tire to receive dressing by using either Adam’s Wheel & Tire Cleaner or Adam’s Tire & Rubber Cleaner to degrease contaminants and old dressings. Allow to dry.2. Spray several mists onto an Adam’s Pro Tire Applicator and several more mists onto the treads and face of the tire. As the applicator dries apply more product directly.3. Work to level the product into the treads, face, lettering and tire details using the applicator in a circular fashion, changing directions periodically.4. Allow satin tire shine dressing to dry for 10-15 minutes and wipe down any excess tire dressing using an Adam’s Edgeless Utility Towel and ensure no product was left on rims.Common Sense Warning:Adam’s Graphene Tire Dressing won’t sling once allowed to dry and properly cure. Leaving excess product on the tires and not leveling the dressing may result in unwanted sling onto vehicle once moving.