Aclorol WS2812B Individually Addressable RGB LED Strip 16.4ft 300 Pixels 5V Programmable WS2812B WS2812 5M 60 Pixels/M Strip Lighting Non-waterproof Work With Arduino, Raspberry Pi

Features: The WS2812B strip is low power consumption, Super-bright but running with low temperature. And every 5050 RGB SMD built-in one WS2811IC Chip, realize individually Addressable, means every one led lighting effect can be controlled, each LED is programmable, with 8 bits of red, green, and blue data shifted in for 24 bit color, Strips take data in green, red, blue order. Match use controller can appear colorful curtain-up/ flow water/raindrop/jump flash and so on hundreds of lighting effect, you can also edit animation effect by Coreldraw/Flash/LedEdit software. WIDELY USED: Widely used on LOGO screen, advertising board, applied to hotel, KTV, bars, commercial street atmosphere lighting, wedding, party lighting and Mother's Day, Halloween, Christmas holiday lighting decor. Really good for replace the traditional neon signs. Parameter Input voltage: DC5V Led SMD Qty: 60pcs RGB SMD5050 per meter Length:16.4ft /5m Power:18W/m, total is 90W Signal: WS2811 chip built-in 5050SMD Wave length(NM):R,650nm ; G,520nm ; B,460nm View angle:120° Dimension:L196* W0.47 * H0.12inches PCB color: White Life span:?50000hrs Warranty:2year Waterproof: Non-waterproof Package: 1x 16.4ft WS2812B LED strip light Kindly note : 1) It comes without power supply and controller. You'll need a controller such as an Arduino to use them. 2) The work voltage of the LED string must be under 6V DC. Otherwise, it will be burnt out. 3) If you want to hook up more than one string, an external power supply is very necessary.