900 Sheets Star Origami Paper Color Flash Star Paper Strip Double Sided Origami Stars Paper Solid Color Lucky Star Decoration Paper Strips DIY Hand Art Crafts

Materials: paper Sheets: 900 Sheets Start Folding the Strip of Paper Start with your strip of paper color side up if you're using colored paper or origami paper. Bring the right end of the paper over and down. Bring the bottom end up and over the left end. Now that you have a loop, feed the top end behind and through the hole. Continue to pull the end through the loop, also gently pull the bottom end to tighten the knot. Make the Knot of the Star Keep wiggling and pulling the knot tighter, flattening it at the same time. The end of the paper strip on the left should be much longer than the end on the right. Fold the excess end behind. You do not need to cut it off but you can do it if it's too long. Fold the end on the left behind, keeping the bottom edge aligned with the bottom edge of the shape in the center. Continue wrapping the pentagon. Fold the strip on top, over to the top left. Keep Wrapping the Pentagon Again wrapping the pentagon, fold the strip down behind to the bottom. Fold the strip up and over to the right. Fold the strip over behind to the left and continue until you only have a small section left. If your strip is just a bit too long, cut it or tear it off. Finish and Inflate the Star Insert the end of the strip inside the pocket. Now inflate the star. Use your index finger and thumb to pinch in one of the points of the star. Rotate the star and gently do the same on all of the points. You can get different results by pinching more or less at this stage