PRODUCT DESCRIPTION:The washer drain pump 8540024 / W10730972 sits at the back of your washer and pumps water out during the drain cycle. When this parts propeller or motor goes bad or the body cracks, your washer wont drain properly and can even leak.
EASY TO INSTALL
Tools Needed:Pliers, 10mm socket, phillips screwdriver
Installation Tips:Unplug washer from electrical outlet. Remove front lower plate using 10mm socket. Remove drain cap on clean-out and drain all water into shallow pan, using wet/dry vacuum to remove water from pan until water has stopped draining. Disconnect wiring harness and two hoses from drain pump assembly. Tilt washer on back legs to access two screws. Block washer to prevent it from tipping forward. Loosen two screws and remove drain pump assembly. Install new drain pump and tighten two screws from underside. Connect both hoses and wiring harness and lower washer to floor. Plug in washer and run a rinse and drain cycle to check for operation and leaks. Install front cover.
FIXES THE FOLLOWING SYMPTOMS:
Error codes Sd followed by F21,F33,SD
Will not drain
Noisy
Pump but will not spin
Washer leaks
WORKS WITH MOST BRANDS:Kenmore Whirlpool
WORKS WITH THE FOLLOWING MODELS NUMBER:
Kenmore:11047711800 11047711801 11047751800 11047751801 11047761800 11047761801 and more.
Whirlpool: 3LCHW9100WQ0 CHW9150GW0 CHW9160GW0 WFW8300SW00 and more.
IFW7300WW01 IFW7300WW02
PLEASE NOTE:Note that appliance parts can look similar in many ways.If you're not sure whether or not a parts you're ordering fits your model,please email us before you order.Include your model number and serial number.We can verify the part will fit your model.
8540024 Front Load Washer Drain Pump Motor Assembly by Beaquicy Replacement for Whirlpool Kenmore Washing Machine
Was:
$59.88
Now:
$29.94
- SKU:
- M294375
- Condition:
- New
- Availability:
- Free Shipping from the USA. Estimated 2-4 days delivery.