8318084 Washer Lid Switch Assembly Part for Whirlpool Kenmore Maytag Washers Replace # WP8318084 ER8318084 1018522 AP6012742 PS11745957

Instructions: The washer lid switch is located on the washer doorframe. The purpose of the lid switch is to stop the washer from operating while the door lid is open. The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed. This part includes the grounding wire. If your machine is having trouble starting, is not agitating, spinning, or is not draining properly, this could be because the lid switch has broken. You will need a 5/16-inch nut driver for this repair. The package will contain one lid switch. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch. This part works with the following brands: Whirlpool, Kenmore, Maytag, Roper, Inglis, Estate, Amana, Crosley, Admiral, KitchenAid, Magic Chef This part fixes the following symptoms: Will Not Start Will not agitate Timer will not advance Pumps but will not spin Notes: Always disconnect the power supply when working on washers and other electrical appliances. This washer lid switch 8318084 can easily be damaged or you can be electrocuted if the electricity is not disconnected when replacing the lid switch. Wear work gloves to protect your hands Specification: Brand: KONDUONE Condition: 100% Brand New and never used Package Includes: 1 x 8318084 Washer Lid Switch assembly KONDUONE always offer the best customer service to his customers.If you have any problem about your order,please feel free to contact us.