7 inch Rearview Car TFT LCD Monitor, RAAYOO 2 Video Input Backup Camera Monitor DVD VCR Monitor With Remote Controller, Full Color Wide Screen

Specifications: - Connections: 4-pin connector - Buttons: Menu, System, Vol -,Vol +, AV1, AV2 - Video System: NTSC/PAL (auto switch) - Display Size: 7.0 inches - Display Mode: 16:9 - Power Consumption: Max 6W - Display Type: Widescreen TFT LCD - Resolution: 800 x 480, 1024 x 768 - Working Power: DC12V - DC24V - Dimensions(mm): 171(l)x114(w)x22(h) General steps for installing this monitor with backup camera. 1.Choose a suitable monitor location in your vehicle that will not block your view for safe driving. 2.Clean the mounting area you chosen with alcohol to remove the dirty or residue. 3.Peel off the protective film from the adhesive tap bracket and then stick the pad to the desired location. (NB: Once put in place, the mounting pad cannot be easily removed. Therefore, before mounting, please be sure of your desired location.) 4.Adjust the bracket of monitor to its best position. 5.Attach the red power wire of your monitor to the positive terminal of 12V DC power,the black one to negative terminal. And attach the green/blue wire to the postive wire on your reversing lamp. 6.Connect the female yellow connector(AV2 video input,support reversing priority) of monitor to the video cable of your camera. Package Contents: 1 x 7" Monitor 1 x Power&Video Cable 1 x Remote Control 1 x RAAYOO User Manual