5pcs/Pack OEM 45 Degree Small Graphtec Compatible Vinyl Cutter Blades Suitable for Graphtec CB09 Cutting Plotter

Feature: • Knifepoint is made from ultrafine grain size Zhuzhou cemented carbide. • Higher hardness, greater strength, good abrasion resistance and good durability; • 30°, 45°and 60°are in different color; • Good sharpness, will not damage your material; • The cutting speed is extremely quick with extra long life. The major difference for blades of different angles is cutting depth. • 30° (Yellow) is great for small and fine designs, and is generally used for cutting quite small words, its knife point is rather sharp; • 45°(Red) is commonly used in general designs, self-adhesive sticker, PVC, reflective film and post-its, which is very practical. • 60°(Blue) is great for large designs, reflective film and other material. Used for: It can be used in clothing proof press and ordinary graphtec plotter . Notes: • If you use different cutters or different papers, you should adjust the extended length of the knife point. When finish adjustment,you can test the effect. • Do not extend the knife point too long, otherwise you will pierce through the backing sheet thereby shorten the service life of cutter blades and mound layer. • When cutting ordinary post-its, the extended length of the knife point should be within 0.55 mm. Application: Commonly used in cutting reflective film, CAD diagram, 3M reflective film, mobile phones beauty paste, etc.