58mm Coffee Distributor and Tamper, CoreReplace Dual Head Coffee Leveler Fits for 58mm Portafilter, Professional Adjustable Depth Espresso Hand Tamper

CoreReplace Coffee Distributor Level, evenly distributed grounds are an essential first step in achieving the perfectly packed basket of fine ground espresso. Twist the blade side down 3 times to evenly disperse the grounds. Turn your tool over and use the flat base palm tamper. Packing the grounds tight creates the right amount of pressure for a proper espresso pull. How to adjust CoreReplace Coffee Distributor height [1]Rotate the two black adjusting rings in the middle counterclockwise to loosen them [2] Fix the black adjusting ring by hand, and loosen the tamper (flat side) counterclockwise to the height you need (the adjustable height is 0-6mm) [3] Turn it over until the distributor side (blade side) is facing up [4] Fix the black adjusting ring by hand, and turn the distributor surface (blade side) counterclockwise to the height you need (adjustable height is 0-6mm) [5] Rotate the two black adjusting rings in the middle clockwise until they cannot be loosened [6] Complete height adjustment, and no need to change after one adjustment How to Use CoreReplace Coffee Distributor [1]Put a fixed amount of coffee powder into the filter basket of the portafilter [2]Retract the distributor side(Blade side) to it's shallowest depth, and place the distributor on your portafilter, blade side down. [3]Gently spin the distributor until your coffee grounds have been evenly distributed and leveled. If the distributor does not reach the coffee, adjust the depth accordingly. [4]Flip the distributor over and extend the tamper (flat side) to its maximum height. Tamp your grounds to your desired pressure. [5]For consistent tamping every time, adjust the tamper depth so it matches the depth of the tamp you created in[4]. Specification Material: 304 stainless steel metal Weight: 1.30LB Packing size: 2.5*2.5*1.4 inches