50 inchx 10 inch Car Hood Stripe Sticker Auto Racing Body Side Stripe Decal Skirt Roof Hood Bumper Stripe Decal Vinyl Modified Stripe Decal Decoration for Car Black

Since the sticker will roll up during transportation, bubbles will appear on the transfer film when the product is received, but the sticker is intact and will not have any effect on your viscosity and effect. After the pasting is completed, the transfer film needs to be removed. Tools: watering can, soapy water, clean cloth, scraper or card, hair dryer |Installation details| 1. Clean the car first, and then tear off the white backing paper. 2. Spray more water on the side of the body and glue to be pasted (to reduce viscosity and facilitate adjustment). 3. Fix one side, and use a card to slowly scrape off and scrape out the water when pasting (note: do not paste the entire sticker, otherwise it is easy to produce bubbles). 4. If there are still bubbles, please use the needle to release the air in the bubbles and make the surface flat 5. After pasting, carefully cut off the excess part or gap with a knife. 6. After 2 hours, after the label is completely dry, remove the transfer film. specification: Material: high quality vinyl Size: 50 inches long * 10 inches wide (125x25 cm) Color:  black, The package includes: 1 * hood sticker. prompt: 1. Do not wax the car one week before using the sticker. Wax will make the sticker non-sticky. 2. Do not use stickers when the car is hot. 3. Don't leave the car under the scorching sun within 48 hours 4. Don't wash the car within 48 hours