4into1 Fork and Dust Seal Kit - Compatible with Kawasaki EX250J Ninja 250R 2008-2012 EX500D Ninja 1994-09

Set of 2 forks seals and 2 dust seals for many of the 80''s Honda''s as well as a few modern models and other makes. When replacing fork seals be very careful not to scratch or gouge the aluminum during the removal of the old seals. Use a fork seal driver to install the new seals. Be sure to drive it in evenly and make sure it fully seats so the snap ring can be installed. If you''re unsure if your forks are stock please check the fork seal dimensions. The old dust boots become stiff and start to crack over time, keep dirt and water off your fork seals with a fresh pair of boots! Fork Seal: Inner Diameter: 37mmOuter Diameter: 50mmHeight: 11mmMaterial: NBR (Nitrile) Dust Seal: Top Opening ID: 35.4mm (1.4")Bottom Opening ID: 38.5mm (1.5")Overall OD: 55mm (2.1")Overall Height: 14mm (.5") Fits Kawasaki: EX250J Ninja 250R - 2008-2012EX500D Ninja - 1994-2009