4G LTE Antenna 10dBi SMA Connector High Gain Omni Directional Antenna with Suction Cups Mount for 4G LTE Wireless Routers

The Abrams-10 high gain antenna is a 3G / 4G omnidirectional antenna that has a unique shape. AppearanceThe antenna is of 11 inches length and width - not more than 1.4 inches. The base of the antenna is a common board made of textolite. On the surface of the board there are specially calculated copper tracks, which are designed to give the antenna a possibility to work with all mobile operators. Despite its size, the 3G / 4G antenna is a sufficient powerful reinforcement device that does not require complicated setup and installation. Installation The antenna is quite easy to install. You do not have to climb onto the roof to install the antenna for the high-quality connection. You won't need to install the mast either. It is enough to place the antenna on the window and connect its cable to your WiFi router with a special SMA adapter. In the USA the antenna works with all mobile operators (AT&T, T-Mobile, Verizon Sprint). The antenna can also be used with any foreign operator. The antenna is designed to work at frequencies of 698MHz -2690MHz, therefore it covers all 3G and 4G protocols. Specification Gain: 10dBi (depending on frequency band) Frequency Range: 698MHz -2690MHz Standards: 4G LTE/3G/WiFi Antenna length: 280mm Antenna width: 35mm Cable length: 1.8 m / 5.9 ft Cable type: RG-174 Connector: SMA Polarization: Linear, Vertical VSWR: ?1.8 Impedance: 50Ohms Operating Temp.: -40°C~+85°C For MIMO applications mount 2 identical Abrams 10 dBi antennas at 90 degree angles to each other. Not for use with cell phones.