44 Key RGB LED Strip Light Remote Controller Wireless Dimmer IR Remote Control for SMD 5050 3528 2835 RGB LED Light Strip Infrared Ray Replacement -2 remotes--

Packing list :2 pcs IR remote as main picture shows. Please note that All other accessories are not included.please note that these led lights remotes are NOT RF remote(which can be through obstacles) and the remote requires that your leds are still with a controller which can be received the signals from remote,which not included in this products Simple tips to control the led light 1.Pls properly connect the led lights to white control box(not included with this product), ARROW TO ARROW, otherwise the led light won't light up and the remote won't work. 2.before using the IR remote ,please remove the INSULATION PLASTIC SHEET which was inserted into the remote on the bottom of the remote controller . otherwise the rgb led remote can't send signal 3. Pls aim the remote controller to the receiver on white control box instead of pointing the remote to other parts of the led light strips.So that the control box can receive signals from remote. and the distance between remote and control box is WITHIN 4 METERS 4. If long time not use the remote, you can insert the plastic sheet into the remote to close the electricity for longer store. 5.If the color buttons on ir remote do not correspond to the correct light color, switch off the remote and press the bottom right button(Fade 7) for a few seconds.The light strip will flash once.after that,switch on the remote and it can control right colors. This will cycle the light colors to different buttons.