400W 15A DC-DC Step-up Boost Converter Constant Current Power Supply LED Driver 8.5-50V to 10-60V Voltage Charger Step Up Module

Adjust Voltage Adjust the "CV-ADJ " potentiometer and set the output voltage to what you need according to your battery or LED. For example, 10 strings of LED voltage are adjusted to 37V. Note ?The inverse clock direction ,voltage is increased / The clockwise direction, voltage is turned down Adjust Current Adjust the "CC-ADJ" potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect the LED, and adjust the RV2 potentiometer to adjust the current you need. Note ?For battery charging, please discharge the battery first, then connected to the output, and adjust the RV2 to the current you need. ?The inverse clock direction ,voltage is turned down/ The clockwise direction, voltage is increase Specification Module properties: non-isolated step-up module (BOOST) Input voltage: DC8.5V-50V Input current: 15A (MAX) If exceeds 8A ,please enhance heat dissipation Quiescent current: 10mA Output voltage: 10-60V continuously adjustable Constant range: 0.2-12A Temperature: -40 to + 85 degrees (If the ambient temperature is too high, please enhance heat dissipation) Operating frequency: 150KHz Conversion efficiency: up to 96% Overcurrent protection: Yes Input reverse polarity protection: no Installation: 4 2.55mm screw holes Connection method: Connection Output Module size: 67mm X48mm X 28mm (LxWxH) Single module: 60 g Package 1 x 400W Boost Converter