4 Pcs 200N 45lb Gas Strut Furniture Cabinet Door Stay Hydraulic Gas Lift Spring Stay Lift Support Furniture Hardware Fittings

4 Pcs 200N/ 45lb Gas Strut, Furniture Cabinet Door Stay, Hydraulic Gas Lift Spring Stay, Lift Support, Furniture Hardware Fittings Size: Extended Length: 270mm(10.6inch) Compressed length: 180mm(7inch) Ball socket to ball socket distance: 245mm(9.6inch) Pressure: 200N/ 45lb Feature: --Gas strut The metal mounting chassis is used at both ends, which is not easy to rust and has a strong bearing capacity. --Gas strut ABS gas head has high wear resistance . --Gas strut Made of pure copper gasket, good sealing, Gas Strut Lift with solid design, strong support. --Round metal mounting plate, large contact area with cabinet, three-point positioning, very firm.Suitable for cabinets Furniture Cabinet Door Stay. --The product comes with a detailed paper installation manual, please read carefully before installing the product. Gas strut Installation instructions: 1.Determine the center position of the rectangle mounting hardware ,it should be 70 mm/2 3/4 inch from the back of the lid (do this bracket last so you can line up the closer with the side of the cabinet),as distance to the side of the lid, it depends on the thickness of your box/kitchen cabinets,then mark A ,drill 2 holes on the sides of the center point A 2.Determine the center position of the round mounting hardware, it should be 240 mm/9 7/16 inch from the back of the cabinet, and 10 mm/2/5 inch from the top of the cabinet ,then mark B ,drill 3 holes around the center point B 3.Fix the connectors and connect the joints and the strut Package Included: 4x Gas stay hinge 8x Fixing Plate 20x Screw 1x Instructions