Specifications:
Material: Plastic
Button: 4 Buttons
Frequency: 314Mhz
Fit For: Ch rysler, Dodge, Jeep
Part Numbers:OHT692713AA OHT692427AA
Compatible Vehicles:
2006-2010 Chrysler PT Cruiser
2007-2009 Chrysler Aspen
2007-2009 Chrysler Sebring
2011-2014 Chrysler 200
2005-2007 Chrysler 300, 300C, 300M
2007-2013 Dodge Caliber
2008-2014 Dodge Avenger
2004-2009 Dodge Durango
2006-2008 Dodge Ram
2006-2007 Dodge Magnum/Charger
2007-2011 Dodge Nitro
2005-2007 Jeep Grand Cherokee
2006-2007 Jeep Commander
2007-2018 Jeep Patriot
2006-2016 Jeep Wrangler
2007-2016 Jeep Compass
2008-2012 Jeep Liberty
Attention!!!
How to Program your Key Fob Replacement:
1.Insert first original working key into the ignition and turn ignition switch to ON.
Wait for approximately 3 seconds then turnignition to OFF and remove key.
2.Within 15 seconds of removing first key insert second original working key into ignition and
turn ignition switch to ON. Wait approximately 10 seconds. You will see the immobilizer warning
lamp illuminate on the dash and you will hear an audible tone.Turn ignition OFF and remove the key.
3.Within 50 seconds insert the new unprogrammed key into ignition. Turn ignition switch to ON.
After approximately 10 seconds you should hear an audible tone and the immobilizer lamp will
remain illuminated for 3 seconds. Once this occurs programming iscompleted.
4.For each additional key you must repeat these steps starting with step number 1.
Before purchase,please enter into the DIY programming link to check procedure.If you are unable to program by yourself,you'd better give this item to your car dealer or a local technician / locksmith for activat