[3800mAh] Upgraded Battery for iPhone 6 Plus, New 0 Cycle Higher Capacity Replacement Battery Compatible with iPhone 6P A1522 A1524 A1593 [24 Months Warr] [No Tool]

Specifications: - Compatible for iPhone 6 Plus  - Battery Material: Li-polymer - Rated Voltage:3.82V Warm Tips Before Installing: 1. Please confirm the cellphone model first before repair. 2. Please run out of battery power or less 20% before you repair. Avoid breaking the battery to cause accident. 3. At the beginning, new battery is unstable and it will reach optimal performance after charging and discharging completely for 3- 5 cycles. 4. If phone cannot turn on after installation, please make sure the battery connector fit tightly with cellphone, then charge battery for 1-2 hour, after that turn on your phone again. Because Sometimes battery exhausted power while transmit need charged for long time. FQA Q1: If the screen display can not open the gap, what should I do ? A1: Please using a hair dryer to continue heating for about 30 seconds, then try again to open it. Q2: Is the feeling of micro-heat on the back of the phone normal after the installation is complete? A2: Please don't worry, this is normal and this battery is new, you need to charger the battery above 8 hours through original battery charger. Q3: After installing battery for iPhone 6 plus, why the phone cannot turn on ? A3: please make sure the battery cables connected have re- installed properly and check its connector and clip it hard. Advised to test this before resealing the phone. Q4: Have any suggestion on replacing the battery by myself ? A4: Please make sure you have watch the installation videos on Youtube about how to replace this iPhone 6 plus battery, and be as careful as you can to avoid damaging the flex cables, especially pay attention to the details of removing adhesive strips. Q5: The voltage limited is 3.82-4.35 but apple charger output is 5V. Will that cause a problem? <