Keenso- The car body repair tool kit can quickly repair your car without damages. And it suitable for the sheet metal processing of truck, automobile, refrigerator, motorcycle body, washing machine etc.
How to use the pdr tools :
1.Clean damage surface with a clean wet cloth.
2.Put the glue stick to gun and connect the power source and preheat for 5-10 minutes.
3.Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue)
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent.
6. When dent was removal, clear the glue by alcohol with plastic shovel.
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 8 Repeat the operation steps above until the dents are repaired.
Note: If you don't know how to use the pdr tool, please contact with us.
Specifications:
Condition: 100% Brand New
Material: Metal, Plastic
Color: As picture shown
Slide Hammer Size(as picture shown): Approx. 49.8 * 11.9cm / 19.6 * 4.68in
Weight: Approx. 1287g
Package Included:
1 * Car Paint Dent Repair Tool
18 * Blue Puller Tabs
10 * Rose Red Puller Tabs
2 * Glue Sticks
