Specifications:
Condition: Brand New
Material: ABS
Color: Black
Rated Voltage: 12V / 24V (automatic switch)
Maximum Load Current: 30A
Input Voltage Range: 12~20V / 24~40V
Length?1m Charging Loop Drop:
Length?1m Discharge Circuit Drop:
Fully Charge Cut-off: 1.37~14.4V / 27.4~28.8V (data under no load condition)
Low Voltage Cut-off: 10.5~11V / 21~22V
Temperature Compensation: -3 mV / ? / battery
No Load Loss: ?10mV (10A / 15A); ?20mV (20A / 30A)
Efficiency: 95%~97%
Maximum Wire Area: 2.5mm² (10A / 15A); 4mm² (20A); 6 mm² (30 A)
Ambient Temperature: -25?~55?
Size(L x W x H): approx. 13.2 x 7 x 3cm / 5.20 x 2.76 x 1.18inch
Weight: approx. 135g
Package Included:
1 x Solar Charge Controller
Wiring Instruction:
1. Storage battery +, -: the 3rd, 4th terminal(from the left)
load indicator light flashes once and will light up after 15 seconds, which shows correct
connection, otherwise it will cause damage to controller.
2. Solar panel +, -: the 1st, 2nd terminal(from the left)
3. Load +, -: the 5th, 6th terminal(from the left)
Indicator Light Instruction:
1. Charge indicator light: light up showing it's at powerful charging status; flash showing it's at
floating charging status; doesn't light showing that charging is finished.
2. Load indicator light: light up showing there is output, load can normally work; otherwise the
load can't work.
Note:
1. Before wiring please check out the rated voltage of solar panel, storage battery, load carefully, ensure they are all 12V of voltage or all 24V.
2. Rated current of solar panel and load can not more than the rated current of controller(30A).
3. Do not directly use solar panel battery to power load.
4. Do not use light to charge solar panel, because it is insufficient when charging by light bulb.
Condition: Brand New
Material: ABS
Color: Black
Rated Voltage: 12V / 24V (automatic switch)
Maximum Load Current: 30A
Input Voltage Range: 12~20V / 24~40V
Length?1m Charging Loop Drop:
Length?1m Discharge Circuit Drop:
Fully Charge Cut-off: 1.37~14.4V / 27.4~28.8V (data under no load condition)
Low Voltage Cut-off: 10.5~11V / 21~22V
Temperature Compensation: -3 mV / ? / battery
No Load Loss: ?10mV (10A / 15A); ?20mV (20A / 30A)
Efficiency: 95%~97%
Maximum Wire Area: 2.5mm² (10A / 15A); 4mm² (20A); 6 mm² (30 A)
Ambient Temperature: -25?~55?
Size(L x W x H): approx. 13.2 x 7 x 3cm / 5.20 x 2.76 x 1.18inch
Weight: approx. 135g
Package Included:
1 x Solar Charge Controller
Wiring Instruction:
1. Storage battery +, -: the 3rd, 4th terminal(from the left)
load indicator light flashes once and will light up after 15 seconds, which shows correct
connection, otherwise it will cause damage to controller.
2. Solar panel +, -: the 1st, 2nd terminal(from the left)
3. Load +, -: the 5th, 6th terminal(from the left)
Indicator Light Instruction:
1. Charge indicator light: light up showing it's at powerful charging status; flash showing it's at
floating charging status; doesn't light showing that charging is finished.
2. Load indicator light: light up showing there is output, load can normally work; otherwise the
load can't work.
Note:
1. Before wiring please check out the rated voltage of solar panel, storage battery, load carefully, ensure they are all 12V of voltage or all 24V.
2. Rated current of solar panel and load can not more than the rated current of controller(30A).
3. Do not directly use solar panel battery to power load.
4. Do not use light to charge solar panel, because it is insufficient when charging by light bulb.
