product name:
Colorful cup humidifier
product material:
ABS+silicone/electronic components
Working current:
250-350
Timing shutdown:
4 hours/6 hours
Rated input:
DC5.0V/1.0A
product weight:
106g
Product Size:
78 × 78 × 119mm
Spray volume:
30-4
?Spray operation instructions?
1. Pull up the upper cover
2. Add water to the water tank
3. Press down the upper cover tightly and connect to the power supply
4. Click the power button to start working
The specific operation steps are carried out according to the product manual! ! !
Note the description:
Before use, the cotton swab must be completely immersed in clean water, and then placed in the straw to prevent the cotton swab from becoming too dry and causing fogging. If you remove the cotton swab, be careful not to lose the spring.
If the amount of fog is significantly reduced during the use of the humidifier, the cotton swab needs to be replaced.
prevention:
1. Due to different measurement options, please allow the size difference to be 1 \\ -3 \\.
2. Due to the influence of the monitor, camera or other factors, there may be small color difference, please refer to the actual project.
notes:
First: make sure that the humidifier uses clean water. Pure water or tap water is best. Let the container stand for a long time. The remaining water must be poured out and rinsed. At the same time, do not use distilled water, so as not to affect the humidifier. Component operation.
Second: Clean in time to avoid bacterial growth.
