3-in-1 Soil Tester meter- Moisture and Light Meter Tester Probe Sensor Soil PH Meter Soil Moisture Sensor plant tester PH Tester Test Tool Kits for Garden Farm Lawn Plants Herbs -No Battery Needed-

3-in-1 Soil Tester meter with Moisture Light and PH Test Function Specifications pH Range: 3.5-8 pH (3.5-6.5 Acid, 7-8 Alkaline) Moisture Range: 1-10 (1-3 Dry, 4-7 Normal, 8-10 Wet) Relative Light Range: 0-2000 lux (0-200 Low, 200-500 Low+, 500-1000 Normal, 1000-2000 Hgh) How to use Step 1 - Adjust the switch to MOIST/LIGHT/pH first, Step 2 - Stick the probe into the soil about 4 inches or deeper (2/3 of the probes), Sensitive probe could sense changes of the soil and transfer details to the conductor. Step 3 - Adjust the position of the probe until the pointer on the dial swing slightly. Step 4 - Displays the accurate values to you immediately.(No battery needed) Step 5 - After about 10 minutes, Note moisture/pH/light level in the dial. Read the value, know the condition of your plants. Step 6 - wipe the probe after use. Soil Moisture Test Red: 1-3 (dry) Green: 4-7 (moisture) Blue: 8-10 (wet) Soil PH Test Help you to balance pH level in soil Red: 3.5-7?pH? Green: 7-8 (pH) Package Include 1 * 3 in 1 Soil Tester Plant Tester Warm Tips - Do not touch the stone or hard rock soil, if the soil is too hard and dry, easy to damage the probes. - Do not measure liquids especially water, it is only used to test the soil moisture or PH. - Please remove probes from soil and wipe clean after each use. - Do not use the measuring pen near the magnetic material and away from other metal objects. - measurement of moisture and pH must be viewed while the unit is in the soil, And the tester must be kept in the soil for 10 minutes or more. - Do not try to remove the metal tip of the tester. If the tip becomes loose, tighten it clockwise